Computer Forensics
Computer Forensics HardwareComputer Forensics SoftwareComputer Forensics TrainingComputer Forensics ServicesPurchase Forensic Computer ProductsTechnical SupportDistributorsCompany Information
HOLIDAY SCHEDULE

DI is closed on the following dates:

May 27, 2013 | Memorial Day

DIGITAL INTELLIGENCE

17165 W. Glendale Drive
New Berlin, WI 53151
866-DIGINTEL (866-344-4683)
Outside the US: 262-782-3332

Site Contents Copyright © 2013
www.DigitalIntelligence.com



UltraBlock
UltraBlock SCSI

The UltraBlock SCSI is used to acquire data from a SCSI hard drive in a forensically sound write-protected environment.

UltraBlock SCSI Kit
SKU: W2300

$429.00

OUT OF STOCK

Additional Power Supply
SKU: X1000

$25.00


UltraBlock SCSI

The UltraBlock SCSI is and eSATA/FireWire/USB to SCSI Bridge Board with Forensic Write Protection. The UltraBlock SCSI can be connected to your laptop or desktop using the eSATA, FireWire-A (400 Mb/s), the FireWire-B (800 Mb/s) or the USB 1.X/2.0 interface. Like the UltraBlock eSATA IDE/SATA, the UltraBlock SCSI is provided with write protection enabled by default but is user configurable for Read-Only or Read-Write Operation.

UltraBlock SCSI

PC Interface:

eSATA, FireWire-A, FireWire-B, USB (1.X/2.0)

Drive Interface:

SCSI-3 (HPDB68 Interface)

User Configurable:

Read-Only or Read-Write

Optional adapters are available for SCSI-1, SCSI-2 and SCA devices. The cost is $20 for each adapter, or purchase the entire set in our SCSI Adapter Kit for $50.

Versatile Operation

In Write Protect mode, the UltraBlock will prevent ANY and ALL writes from reaching the attached device. It is compatible with all Windows 98se, Windows ME, Windows 2K/XP, and any O/S that supports IEEE 1394 and has a compliant card and drivers.

In Read/Write mode (non-Write Protected), it can be used to attach a drive to be used for receiving images on your FireWire chain.

The UltraBlock is shipped by default in a Read-Only (write blocking) configuration. However, it can be configured to enable Read-Write operation as well. To prevent unwanted alteration it necessary for the customer to make a modification to the housing to enable the Read-Write operation.

Configuration Switches

SWITCH 1
OFF = Read Only (write blocking enabled)
ON = Read/Write

SWITCH 2
OFF = Unit reports errors if writes are attempted
ON = Unit suppresses errors if writes are attempted

SWITCH 3
OFF = Unit reports Write-Protect (WP) status in code page
ON = Unit supresses Write-Protect (WP) status in code page

SWITCH 4
Reserved

Notes

The UltraBlock Power Supply may only be used to power one UltraBlock and one Hard Drive. Do not attempt to use a single external power supply to power more than one UltraBlock and Hard Drive.

This UltraBlock Kit includes the UltraBlock Device, UltraBlock Power Supply, 9-pin to 9-pin FireWire-B (800) cable, USB cable, one drive power cable, one 9-6 pin Firewire adapter, one 9-4 pin Firewire adapter and one SCSI drive data cable.

Additional FireWire-A (400), FireWire-B (800), and USB Cables are available from Digital Intelligence as required for your application.

The UltraBlock family of write blockers is also available in a complete forensic kit available on the UltraKit page.

The UltraKit and complete UltraBlock family are available exclusively from Digital Intelligence!