Changes Saved.
Error Occurred!
Computer Forensics
Computer Forensics HardwareComputer Forensics SoftwareComputer Forensics TrainingComputer Forensics ServicesPurchase Forensic Computer ProductsTechnical SupportResellersCompany Information
Digital Intelligence Helpdesk


BIOS Setup for the Z8PE-D18 Motherboard

The instructions for resetting the CMOS are on page 2-24 of the Z8PE-D18 Motherboard Manual.

Here are the BIOS setup instructions you'll need for the Z8PE-D18 motherboard following a CMOS reset.

  1. Turn on the system and when you see the FRED splash screen hit Delete a few times to enter the BIOS setup
  2. Go to the Exit menu and Load Setup Defaults
  3. Go to the Main menu and Set Time and Date
  4. Go to IDE Configuration in the Main menu and Configure SATA as AHCI
  5. F10 to save and exit

Related Articles