Loading...
Changes Saved.
Error Occurred!
Computer Forensics
Computer Forensics HardwareComputer Forensics SoftwareComputer Forensics TrainingComputer Forensics ServicesPurchase Forensic Computer ProductsTechnical SupportResellersCompany Information
Digital Intelligence Helpdesk

KnowledgeBase

UltraBay 1 Write Protect Switch

When I push the write protect switch on the UltraBay 1, the write protect light does not change.

This is because the UltraBay needs to be power cycled. The correct procedure for toggling the write protect on the UltraBay is as follows:

1. Turn your UltraBay off.

2. Toggle the write protect switch.

3. Turn your UltraBay back on.

This process should change the write protection state.




Related Articles