Loading...
Changes Saved.
Error Occurred!
Computer Forensics
Computer Forensics HardwareComputer Forensics SoftwareComputer Forensics TrainingComputer Forensics ServicesPurchase Forensic Computer ProductsTechnical SupportResellersCompany Information
Digital Intelligence Helpdesk

KnowledgeBase

SCSI Device Jumpers

Do I need to jumper a SCSI device for a specific SCSI ID when I'm using the UltraBlock SCSI bridge?

The UltraBlock SCSI bridge automatically searches SCSI addresses 0..6 and 8..15 for an attached SCSI device. The UltraBlock SCSI bridge itself uses the fixed SCSI ID 7, which is "standard" for host adapters. So, you only need to change a device's SCSI ID if it also happens to be set for SCSI ID 7, as that would conflict with the UltraBlock's own SCSI ID.



Related Articles